Contour Your Body With Coolsculpting
In
the past, if diet and exercise couldn't get rid of stubborn fat bulges, many
patients opted for liposuction, an invasive surgical procedure. Or, they turned
to radio frequency devices or infrared technology, but these devices provided
limited improvement. With advancements in technology, patients can now reduce
unwanted fat bulges and enjoy permanent reduction in fat cells during a
non-invasive, non-surgical method called CoolSculpting that provides dramatic
results.
For many years liposuction has been the gold standard when it comes to fat reduction procedures. Though many people have had great results with liposuction, there are just as many people who have not been happy with their liposuction results. In the past few years, we have seen several new fat reduction procedures on the market.
Benefits of liposuction compared to CoolSculpting are that liposuction can be used to treat larger and hard to reach areas. During liposuction a suction tube (cannula) is inserted through small incisions in the skin, and fat cells are then sucked out through the tube. This process can sometimes lead to uneven results, causing unsightly "bumps" and "dents" in the treated areas. Coolsculpting santa clara uses a unique applicator that is applied to the area of fat being treated. Once applied, the CoolSculpting device then freezes the fat inside the applicator. Once the fat cells are frozen, they are dissolved and removed naturally by your body over the course of time. Results can be seen in as little as three weeks, and will continue to happen for six months until all of the fat cells are permanently removed. The beauty of the CoolSculpting applicator is that it provides a smooth and even reduction of fat without the bumps that can be seen with liposuction.
Coolsculpting fremont CA can reduce
areas that are difficult to reach with diet and exercise: love handles, lower
belly fat rolls, upper belly fat, muffin top, under bra fat and back fat. It's
an incredibly effective technique that improves the contour of the body.
How
is this possible? The FDA-cleared CoolSculpting works through a revolutionary
technology called cryolipolysis. During cryolipolysis, literally meaning
"cold induced fat destruction," fat cells are cooled to a temperature
that causes them to be eliminated. The procedure is very safe: the temperature
required to destroy fat cells is higher than what would cause damage to skin,
muscle and nerves. With CoolSculpting, there is no damage to the surrounding
structures.
During
the procedure, the physician applies a skin protecting gel pad to the skin, and
a CoolSculpting applicator is positioned over the desired treatment area. The
device draws the fat bulge in, and cools down the fat to induce cryolipolysis,
continuously monitoring the temperature and adjusting it as needed.
For many years liposuction has been the gold standard when it comes to fat reduction procedures. Though many people have had great results with liposuction, there are just as many people who have not been happy with their liposuction results. In the past few years, we have seen several new fat reduction procedures on the market.
However,
most of these have not been an adequate alternative to liposuction in terms of
fat loss and body contouring. Until CoolSculpting. For those of you that have
not heard of it before, CoolSculpting is a revolutionary, non-invasive
procedure that uses cooling technology to permanently get rid of fat cells
without surgery.
CoolSculpting
is an excellent liposuction alternative for those who do not want to have
surgery. In most cases, the results with CoolSculpting are even better than
those with liposuction.
Let's
take a closer look at Liposuction vs. Coolsculpting in San Jose CA.
Liposuction
is a surgical procedure. That means it requires anesthesia, several incisions,
and recovery time. The CoolSculpting procedure is totally non-invasive. There
are no needles, no incisions, and no downtime involved with CoolSculpting.
Since liposuction involves surgery, there are also risks and complications
involved. Infection of the incision sites and fluid buildup can contribute to
less than desirable results with liposuction. On the other hand, CoolSculpting
is safe and low risk. Some people may experience redness, minor bruising,
tingling, numbness or discomfort in the treated area, but this is temporary and
will resolves completely on its own. Since there is no downtime associated with
CoolSculpting, you can resume your normal activities immediately after your
treatment.
Benefits of liposuction compared to CoolSculpting are that liposuction can be used to treat larger and hard to reach areas. During liposuction a suction tube (cannula) is inserted through small incisions in the skin, and fat cells are then sucked out through the tube. This process can sometimes lead to uneven results, causing unsightly "bumps" and "dents" in the treated areas. Coolsculpting santa clara uses a unique applicator that is applied to the area of fat being treated. Once applied, the CoolSculpting device then freezes the fat inside the applicator. Once the fat cells are frozen, they are dissolved and removed naturally by your body over the course of time. Results can be seen in as little as three weeks, and will continue to happen for six months until all of the fat cells are permanently removed. The beauty of the CoolSculpting applicator is that it provides a smooth and even reduction of fat without the bumps that can be seen with liposuction.
Comments
Post a Comment